Hydroponic Growing Ebb and Flood Bench on Wheel for Greenhouse

Cover Material	Pc Sheet
Model Number	GT607
Place of Origin	Sichuan, China
Brand Name	GT
Name	Hydroponic growing ebb and flood bench on wheel
Width	1.22m , 1.69m, 1.77m
Length	customized
Height	75cm, 80cm, customized
Features	Movable/fixed
Max load	25kg, 45kg,80kg, customized
Material	Galvanized /aluminum frame
Bench top	Abs
Rack system	On top rack systems
Installation	Fabricated with Manual Drawing

 

Product descriptions from the supplier

Hydroponic growing ebb and flood bench on wheel for greenhouse is used especially for sub irrigation.
Greenhouse ebb and flood bench is used especially for sub irrigation. Subirrigation is a method of irrigation where water is delivered to the plant root zone from below the soil surface and absorbed upwards. The excess may be collected for reuse.In this system, Bench-mounted tray enclosures holding pots are filled and then drained. The system consists of a shallow, molded plastic bench top which is flooded with water and fertilizer to both water and feed the plants.When irrigation is complete, the remaining solution drains from the bench and is pumped back to a storage tank.

In this system, Special sloped concrete flooring is flooded and drained.The entire floor of the greenhouse is covered with concrete carefully designed and installed to pitch toward openings in the floor. Through these openings the irrigation solution enters to flood the floor and, following flooding, the excess drains back to the storage tank.

Why use Hydroponic growing ebb and flood bench on wheel for greenhouse?

· This system is easy to learn and can be fine tuned to suit a variety of crops.

· Increase Greenhouse efficiency: improves production capacity by having 70%-80% space in greenhouse.

· Grow plants uniformly and reduce foliar disease.

· Increase in plant uniformity may be the result of more even and complete moistening of the growth medium and better distribution of nutrients absorbed by capillary flow.

· Save labour

· A single person can water thousands of plants by operating the flooding system manually or with the help of a computer.

· Amount of time needed to water the crop drops dramatically.

· Decrease in labor need will help free up workers to do other tasks.

· Save water and fertilizer

· According to research, water and fertilizer usage was cut over 50% by using a close system since water and fertilizer(nutrient solution) are recirculated and not lost by leaching or runoff.

· Less fertilizer is needed, resulting a in lower cost to produce the same quality product.

· Increase safety (Long term benefit)

· It is safer for the environment as water containing fertilizers and chemicals will not leach into our valuable drinking water supplies, helping our children and future generations.

· Less chemicals were needed, cutting down on workers exposure to pesticides and fungicides.

· Reduce risks of getting injuries among workers when doing repetitious manual handling tasks

· Cost effective

· Existing bench frames can be retrofitted.

· The productivity of system is maintained at a high level due to 70%-80% space saving in greenhouse and the reduction of labor, water, fertilizers and chemicals etc.

Customized

· SPECIAL MADE TO ORDER possible system which allows for flexibility in design.

· All your special orders are at a minimum cost, because the advanced technology of manufacturing the product requires NO ADDITIONAL SETUP OR EXTRA LABOR COSTS.

Flexible

· Easy to assemble.

· Supplied in kit form (minimize transport costs).

Technical Date For Hydroponic growing ebb and flood bench on wheel for greenhouse

Product Name:	plastic agriculture greenhouse ebb and flood movable rolling bench
Material:	galvanzied steel Abs
Width	1.22m, 1.69m, 1.71m
Max Width:	2100mm
Length 1:	can be customized
Length 2:	can be come one piece 1.22m*2.44m or 1.69m*4.45m as one piece
Height	75cm, 90cm, or customized
Features	Movable and Fixed
Max load	25kg/m2, 45kg/m2, 80kg/m2, or customized

 

Other Greenhouse Bench Pictures